Proxim wireless ORiNOCO AP-4000MR-LR Guía de instalación descargar pdf (Pagina 17)

Step 9: Tighten the Cables

Apply two wraps of Teon tape around the threads of the unit’s RJ45 jack 1.

(A) in a clockwise direction.

Make sure that the red rubber gasket is still seated in the sealing cap of the 2.

sealing cap/lock nut assembly (B).

Slide the sealing cap/lock nut assembly (B) over the RJ45 jack (A) and 3.

thread onto enclosure. Hand tighten rst, then use a pipe wrench or similar

tool to tighten one more quarter turn.

Caution!

Do not over-tighten!

Tighten the lock nut (C) (Torque 4 N.m/35 in-lbs).4.

Thread the sealing nut (D) onto the sealing cap/lock nut assembly (B) and 5.

tighten (Torque 3 N.m/25 in-lbs).

Caution!

The lock nut (C) on the sealing cap/lock nut assembly (B) must

be fully tightened over the RJ45 connector before the sealing nut

(D) is fully tightened. Otherwise, the Ethernet cable may twist and

damage.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Sin comentarios

Proxim wireless ORiNOCO AP-4000MR-LR Guía de instalación Pagina 17